call us : 
send a message : 
-
FATTY ALCOHOL ETHOXYLATE 9EO（AEO-9/AEO9) CAS NO: 111-09-3
AEO-9 is a representative nonionic surfactant of the EO type in the fatty alcohol polyoxyethylene ether series. It is formed by addition polymerization of fatty alcohols (mainly lauryl alcohol and cocoyl alcohol) with 9 ethylene oxide (EO) molecules, with a chemical formula of. Its hydrophilic lipophilic balance value (HLB) has strong adaptability and excellent cleaning, emulsifying, and wetting abilities, making it one of the most widely used AEO models in the daily chemical and industrial fields. 1、 Core physical and chemical properties Appearance and solubility At room temperature, it is a milky white paste like or light yellow viscous liquid, and gradually becomes a transparent liquid when the temperature is above 40 ℃; Easy to dissolve in water, forms a clear and transparent solution after dissolution, and is also soluble in polar organic solvents such as ethanol and ethylene glycol. The hydrophilic lipophilic balance (HLB) value is about 12-13, belonging to the oil in water (O/W) type emulsifier, with high emulsification efficiency and the ability to stably disperse various oil phase substances. Key performance parameters Hydroxyl value: about 90-100 mgKOH/g PH value (1% aqueous solution): 5.0~7.0 (neutral) Cloud point (1% aqueous solution): about 50-60 ℃ (after exceeding the cloud point, the aqueous solution becomes turbid and the surface activity slightly decreases, which can be restored after cooling) Moisture content: ≤ 1.0% Surface tension (0.1% aqueous solution, 25 ℃): approximately 32-35 mN/m Chemical stability and mildness Acid resistant, alkali resistant, and hard water resistant, with stable performance in the pH range of 3-11, and will not precipitate with calcium and magnesium ions in hard water. Its applicability is far superior to anionic surfactants. Low skin and eye irritation, with a biodegradation rate of over 90%, in compliance with EU REACH and domestic safety standards for daily chemical and food industries. High temperature stability is good, and the performance is stable when the temperature is below 120 ℃. Long term exposure to an environment above 120 ℃ can lead to slow degradation of polyoxyethylene chains. 2、 Main purpose AEO-9 can be used alone or in combination with anionic (such as LAS) and cationic surfactants to produce synergistic effects, with application scenarios covering multiple industries Daily chemical washing field As the core decontamination component of laundry detergent, washing powder and detergent, it has strong decontamination power, rich foam and is easy to rinse, mild and harmless, especially suitable for preparing high-end washing products. Used for personal cleaning products such as shower gel and hand sanitizer, it has both cleaning and moisturizing effects, reducing product irritation to the skin. Textile printing and dyeing industry In the pre-treatment of printing and dyeing (desizing, boiling, bleaching), it is used as an efficient wetting agent and detergent to help auxiliaries quickly penetrate fibers and remove impurities such as oil and pulp on fabrics. As a leveling agent in the dyeing process, it prevents dye aggregation, avoids fabric discoloration and color difference, and improves dyeing uniformity and brightness. In the process of synthetic fiber spinning, it can be used as an oil component, which has both lubricating and anti-static effects, reducing fiber breakage and entanglement. 3、 Comparison with EO models in the same series Type EO Bonus Number Hlb Value Cloud point (1% aqueous solution) Core Functional Differences AEO-7 7 10~12 40~50℃ Low foaming, wetting, emulsifying, suitable for medium and low temperature cleaning AEO-9 9 12~13 50~60℃ High cleaning power, high emulsification, and wider application AEO-10 10 13~14 60~70℃ High water solubility, strong stain removal, suitable for high-temperature cleaningTags : FATTY ALCOHOL ETHOXYLATE 9EO（AEO-9/AEO9) CAS NO: 111-09-3 64005151 - FATTY ALCOHOL ETHOXYLATE AEO9 FATTY ALCOHOL ETHOXYLATE 9EO LAURETH-9 AEO-9/AEO9/AEO/9 CAS NO: 111-09-3
-
FATTY ALCOUOL ETHOXYLATE 10EO (AEO-10/AEO10) CAS NO:111-09-3
AEO-10 is a non-ionic surfactant of medium to high EO type in the fatty alcohol polyoxyethylene ether series. It is formed by addition polymerization of fatty alcohols (mainly lauryl alcohol and cocoyl alcohol) with 10 ethylene oxide (EO) molecules. Its chemical formula is. Its hydrophilicity is superior to AEO-7 and AEO-9, and it has the characteristics of strong stain removal, high emulsification, and high temperature resistance. It is a commonly used high-efficiency surfactant in the fields of daily chemical and industrial cleaning. 1、 Core physical and chemical properties Appearance and solubility At room temperature, it is a milky white paste like or light yellow viscous liquid, and when the temperature is above 45 ℃, it becomes a transparent liquid; Highly soluble in water, it forms a clear and uniform solution upon dissolution. It is also soluble in polar organic solvents such as ethanol and propylene glycol, but difficult to dissolve in non-polar solvents such as petroleum ether. The hydrophilic lipophilic balance (HLB) value is about 13-14, belonging to the oil in water (O/W) type emulsifier, with strong emulsifying ability and the ability to stably disperse high proportion oil phase systems. Key performance parameters Hydroxyl value: about 80-90 mgKOH/g PH value (1% aqueous solution): 5.0~7.0 (neutral) Cloud point (1% aqueous solution): about 60-70 ℃ (cloud point higher than AEO-7 and AEO-9, suitable for medium and high temperature cleaning scenarios, surface activity decreases after exceeding the cloud point, and can be restored by cooling) Moisture content: ≤ 1.0% Surface tension (0.1% aqueous solution, 25 ℃): about 30-33 mN/m Chemical stability and mildness Acid resistant, alkali resistant, and hard water resistant, with stable performance in the pH range of 3-12. It is not easily combined with calcium and magnesium ions to form precipitates and has stronger adaptability than most anionic surfactants. Low irritation to the skin and eyes, with a biodegradation rate of over 90%, meeting the safety standards for cleaning daily chemical and food processing equipment. High temperature stability is good, and the performance is stable when the temperature is below 120 ℃. Long term exposure to an environment above 120 ℃ can lead to the degradation of polyoxyethylene chains and reduce surface activity. 2、 Main purpose AEO-10 can be used alone or in combination with anionic (such as LAS, AES) and cationic surfactants to enhance efficiency. Its application scenarios cover multiple industries Daily chemical washing field As the core and efficient cleaning ingredient of laundry detergent, laundry powder, and dishwashing detergent, its cleaning power is superior to AEO-9, especially suitable for cleaning heavy oil contaminated clothes and tableware; Foam is rich and easy to rinse. It is gentle and does not hurt hands. It is often used in high-end washing products. It is used for personal care products such as shampoo and shower gel. It has both cleaning and emulsifying functions, can help dissolve oil soluble essence and plant extracts, and improve product stability. 3、 Comparison with EO models in the same series Type EO Bonus Number Hlb Value Cloud point (1% aqueous solution) Core Functional Differences AEO-7 7 10~12 40~50℃ Low foaming, wetting, emulsifying, suitable for medium and low temperature cleaning AEO-9 9 12~13 50~60℃ High cleaning power, high emulsification, and wider application AEO-10 10 13~14 60~70℃ High water solubility, strong stain removal, suitable for high-temperature cleaningTags : FATTY ALCOUOL ETHOXYLATE 10EO (AEO-10/AEO10) CAS NO:111-09-3 FATTY ALCOUOL ETHOXYLATE 10mol (LAURETH-10) LAURETH-10 FATTY ALCOUOL ETHOXYLATE 10mol Fatty alcohol polyoxyethylene ether CAS NO:111-09-3
-
SODIUM LAURETH SULFATE 1EO CAS NO: 9004-82-4
Sodium Laureth Sulfate 1EO refers to sodium lauryl ether sulfate, a common anionic surfactant, where 1EO indicates that the lauryl hydrophobic chain in its molecule is connected to one ethoxy (-CH₂CH₂O-) unit. Basic Structure and Properties Chemical Structure: Its general structural formula is:CH3(CH2)10CH2(OCH2CH2)1OSO3Na. It consists of three parts: Hydrophobic group: Lauryl group (C12 alkyl chain) Connecting group: 1 ethoxy unit Hydrophilic group: Sodium sulfate ester group Core Performance Excellent surface activity: It can significantly reduce the surface tension of water, and has strong emulsifying, detergency, and foaming abilities, producing rich and stable foam. Improved water solubility: Compared to sodium lauryl sulfate (SLS) without ethoxy groups, the introduction of one ethoxy unit improves its water solubility, making it less likely to precipitate at low temperatures. Optimized mildness: It is slightly less irritating than SLS, but still belongs to the category of moderately irritating surfactants, suitable for cleaning products. Hard water resistance: It has stronger hard water resistance than SLS, maintaining good cleaning performance in water containing calcium and magnesium ions. Compatibility: It can be compounded with nonionic, cationic (caution is needed to avoid precipitation), and other anionic surfactants. Main Application Areas Personal care products: Used in shampoos, shower gels, facial cleansers, hand soaps, etc., playing a core role in cleaning and foaming. Due to the low number of EO units, it has strong detergency and is often compounded with mild surfactants (such as cocamidopropyl betaine) to reduce irritation. Household cleaning products: Used in laundry detergents, dishwashing detergents, hard surface cleaners, etc., utilizing its emulsifying and foaming abilities to improve cleaning efficiency. Industrial field: It can be used as an emulsifier in pesticide and paint formulations, and also as a wetting agent in the textile industry and a degreasing agent in the leather industry. Differences from similar products Product Eo Number Water-Soluble Mildness Detergency SLS 0 General Lower Strong SLES-1EO 1 Better Moderate Stronger SLES-2EO/3EO 2-3 Very Good Higher Moderate Precautions: At high concentrations, it can be irritating to the skin and eyes. The proportion added to formulations needs to be controlled (usually 5%-15% in personal care products). Avoid high temperatures and strong acidic environments during storage, otherwise hydrolysis may occur, reducing its activity.Tags : SODIUM LAURETH SULFATE 1EO CAS NO: 9004-82-4 SODIUM LAURETH 1 SULFATE(SLE1S) SODIUM LAURETH SULPHATE 1EO SODIUM LAURETH SULFATE SLE1S CAS NO: 9004-82-4 Fatty alcohol polyoxyethylene ether, sodium sulfate
-
SODIUM LAURETH SULPHATE 3EO CAS NO: 9004-82-4
Sodium Laureth Sulfate 3EO (SLES-3EO) is an anionic surfactant. 3EO indicates that its molecule contains 3 ethoxy (-CH₂CH₂O-) units attached to the lauryl hydrophobic chain. It is a widely used mild surfactant in the daily chemical and cleaning industries. Basic Structure and Properties Chemical Structure: The general structural formula is: CH3(CH2)10CH2(OCH2CH2)3OSO3Na. It mainly consists of three parts: Hydrophobic group: Lauryl group (C₁₂ alkyl chain) Connecting group: 3 ethoxy units Hydrophilic group: Sodium sulfate ester group Core Performance Outstanding Mildness: Compared to SLS (0EO) and SLES-1EO, the introduction of 3 ethoxy units significantly reduces skin and eye irritation, making it a commonly used mild cleansing and foaming ingredient in personal care products. Excellent Water Solubility: The increased number of ethoxy units enhances hydrophilicity, maintaining good solubility even at low temperatures and preventing precipitation and stratification. Balanced Foaming and Cleaning: It produces rich and dense foam that is easy to rinse off, and has moderate cleaning power, effectively cleaning grease and dirt without excessive degreasing that leads to dry skin. Strong Hard Water Resistance: It exhibits good stability in hard water containing calcium and magnesium ions, and the cleaning effect does not significantly decrease. Good Compatibility: It can be compounded with non-ionic and amphoteric surfactants (such as cocamidopropyl betaine, alkyl glycosides), further improving mildness and foaming properties; caution is needed when compounding with cationic surfactants to avoid precipitation. Main Application Areas Personal Care Products It is a core ingredient in shampoos, shower gels, facial cleansers, and baby care products, especially suitable for sensitive skin and infant care formulations, with a typical addition ratio of 5%–20%. Household Cleaning Products Used in dishwashing detergents, laundry detergents, hand soaps, etc., balancing cleaning power and mildness, reducing irritation to the skin of the hands. Industrial Applications It can be used as a wetting agent in the textile industry, a pesticide emulsifier, and a leather degreasing agent, achieving efficient processing under mild conditions. Differences from similar products Product Eo Number Water-Soluble Mildness Detergency SLS 0 General Lower Strong SLES-1EO 1 Better Moderate Stronger SLES-2EO/3EO 2-3 Very Good Higher Moderate Precautions: Although generally mild, high concentrations (>20%) may still irritate sensitive skin; therefore, the amount used in formulations should be controlled. Store in a sealed container in a cool, dry place, avoiding contact with strong acids and high temperatures to prevent hydrolysis and loss of activity.Tags : SODIUM LAURETH SULPHATE 3EO CAS NO: 9004-82-4 3EO CAS NO: 9004-82-4 SODIUM LAURETH SULPHATE SLES-3EO CAS NO: 9004-82-4 SLES-3EO
-
Silicone Coated Fiberglass Fire Blanket
ltem Size G/M2 Thickness Weave Type Temp °C Color Packaging TC-HSFB3x4 300x400cm 480/m2 0.44 (mm) Twill 1200 °C Grey BAG TC-HSFB4x6 400x600cm 480/m2 0.44 (mm) Twill 1200 °C Grey BAG TC-HSFB6x6 600x600cm 480/m2 0.44 (mm) Twill 1200 °C Grey BAG TC-HSFB6x8 600x800cm 480/m2 0.44 (mm) Twill 1200 °C Grey BAG TC-HSFB6x9 600x900cm 480/m2 0.44 (mm) Twill 1200 °C Grey BAG TC-HSFB8x10 800x1000cm 480/m2 0.44 (mm) Twill 1200 °C Grey BAG Product Features High and low temperature resistance: Silicon coated fireproof blankets can maintain stable performance in extreme temperature environments, effectively preventing heat transfer and protecting the surrounding environment and structure from damage, regardless of whether it is high or low temperature. Corrosion resistance and wear resistance: Organic silicon materials have excellent chemical stability, can resist the erosion of various chemical substances, and have good wear resistance, ensuring long-term stability and reliability. Thermal insulation and sound insulation: The dense structure and high-quality materials of the silicone coated fireproof blanket make it have excellent thermal insulation and sound insulation effects, which can effectively reduce noise and heat transfer, providing a more comfortable and quiet environment for buildings. Fireproof performance: After special treatment, silicone blankets have excellent fireproof performance, which can effectively prevent the spread of fire in the event of a fire, and buy valuable time for escape and rescue. Application Scenarios In the industrial field, silicon coated fireproof blankets can be used for thermal insulation protection of industrial equipment, such as pipelines, valves, furnaces, etc., to prevent equipment damage and personnel injury caused by heat transfer. In the field of architecture, silicone blankets can be used for insulation and soundproofing of walls, roofs, and floors to improve the energy efficiency and comfort of buildings. Transportation: In the field of transportation, silicone blankets can be used for insulation and soundproofing of vehicles, ships, and aircraft to enhance the riding experience. Other fields: In addition, silicone blankets can also be used in many fields such as household appliances, medical equipment, and military equipment to provide protection for various devices and structures.Tags : Silicone Coated Fiberglass Fire Blanket Silicone Coated Fire Blanket EV Car Fire Blanket High Temp Resistance Fire Blanket Fiberglass Fire Blanket High Silica Fiberglass Fire Blanket
-
Silicone Coated Fiberglass Welding Blanket
Item Size G/M2 Thickness Weave Type Temp °C Color Packaging TC-WB-1010 1000X1000mm 430/850 0.43/0.8 (mm) Twilt 550℃/800℃ off white Bag/Box TC-WB-1212 1200X1200mm 430/850 0.43/0.8 (mm) Twilt 550℃/800℃ off white Bag/Box TC-WB-1515 1500X1500mm 430/850 0.43/0.8 (mm) Twilt 550℃/800℃ off white Bag/Box TC-WB-1218 1200X1800mm 430/850 0.43/0.8 (mm) Twilt 550℃/800℃ off white Bag/Box TC-WB-1818 1800x1800mm 430/850 0.43/0.8 (mm) Twilt 550℃/800℃ off white Bag/Box TC-WB-2020 2000X2000mm 430/850 0.43/0.8 (mm) Twilt 550℃/800℃ off white Bag/Box Excellent protection performance: The small welding blanket is made of high-quality high-temperature resistant materials such as glass fiber and ceramic fiber, and has excellent high-temperature resistance and thermal insulation performance. During the welding process, the welding blanket can effectively block sparks and slag splashes, protecting workers from burns and fire risks. The protection level of the welding blanket is very high, and it can be used for a long time in high temperature environments to ensure work safety. Lightweight and durable: The small welding blanket is lightweight and soft, easy to carry and lay, and can flexibly adapt to various welding work environments. After special processing, the welding blanket has good wear resistance and tear resistance, ensuring that the structure remains intact during use. The blanket can be reused, and its protective properties remain unchanged after cleaning and drying. Safety and Environmental Protection: The welding blanket is made of environmentally friendly materials, non-toxic and harmless, and will not cause harm to the environment and human health. Electric blankets strictly comply with relevant national standards and regulations during the production process to ensure that the products meet safety requirements. Application Scenarios Welding protection Prevent welding sparks and high-temperature slag from damaging surrounding equipment and the ground. It is suitable for welding scenarios such as construction, shipbuilding, and automotive maintenance. High temperature operation insulation protection Used for insulation protection around high-temperature equipment such as boilers, furnace bodies, and pipelines. industrial protection Prevent sparks from igniting flammable materials or equipment in factory workshops and warehouses. outdoor work Suitable for various outdoor welding scenarios, protecting the surrounding environment and improving work safety.Tags : Silicone Coated Fiberglass Welding Blanket Welding Blanket White Welding Protection High Temperature Heat Resistant Glass Fiber Welding Blanket White Welding Blanket
online service
